▲

Support: WinTV-quadHD

WinTV application for the WinTV-quadHD

With support for four tuner picture-in-picture

Installation notes for WinTV v10:

If you do not have a WinTV v10 Activation Code, you can purchase a new WinTV v10 Activation Code on the Hauppauge webstore.

If you have purchased an Activation Code for WinTV v10 with Extend from the Hauppauge Webstore, the latest version of WinTV v10 with Extend will be installed.

Installation on multiple computers: the WinTV application can be installed on as many PCs as needed as long as you use the same Hauppauge device. We link the serial number of your TV tuner (sometimes it's the MAC address) with the Activation code. So as long as you use the same Hauppauge device, you can install on more than one computer.

WinTV v10

This download is a complete WinTV v10 application, including Windows drivers for supported WinTV products plus utilities.

WinTV v10 installer
For Windows 11 and 10 (with limited support for Windows 8 and 7)
Version: 42298 | File size: 161 MB | Date: 15.10.2024
Release notes | Backup download site | Previous version 41041

Beta version

Includes video decoders for new ATSC TV broadcasts using H.264 and HEVC encoding. Note: run 'Empty Channel Database' and rescan for channels to detect the new decoders.
wintv10setup_42305.exe

Note: this version has a fix for the bug with the WinTV-quadHD or WinTV-HVR-1265 where the board is not recognized after a Windows update or reinstall of Windows.
Please note: due to changes in Microsoft's code signing policy for Windows 7 and 8, new drivers cannot be signed for the 64-bit version of Windows 7 and 8. The WinTV v10 application will work, but the drivers will not install without warning messages. Windows 10 and 11 will install normally.

WinTV v10 installation instructions

The WinTV v10 will install Windows drivers before installing the WinTV v10 application.

  • Step 1: Download the WinTV v10 installer by clicking the download button above. The WinTV v10 installer is normally saved in the Download folder on your PC
  • Step 2: Run wintv10setup from the Download folder on your PC. If you see the message "Windows Protected Your PC, Windows Smartscreen prevented an unrecognized app ...", click 'More info' and 'Run anyway'. Windows Smartscreen is a new 'feature' in Windows 10 to prevent new updates from being installed automatically.
  • Step 3: Halfway through the installation, a message will pop up asking for you to enter the Activation Code.
  • Step 4: At the Activation required screen, click on Enter Activation code and enter the activation code which was emailed to you or is printed on the WinTV v10 activation card. You do not need to enter the dashes, and you can use upper or lower case characters.
  • Step 5: When the installation is complete, you will find the WinTV icon on your Windows desktop. Double click on this icon and the WinTV application will run. On the first run of WinTV, it will automatically go through the TV source selection and will scan for channels.

Windows Driver

WinTV-quadHD driver version 37308

To install the latest Windows driver only:

Leave your WinTV plugged into your PC. Follow the following steps:

  • Download the Windows driver above.
  • Double click the downloaded driver. This will install the Windows driver.
  • At the completion of the driver install, you should see a message which says Drivers have been updated successfully.

At this point, the Windows driver will be installed.

WinTV-quadHD Videos

WinTV v10 Installation
click to play video
WinTV v10 Introduction
click to play video
Four tuner Picture-in-Picture
with the WinTV-quadHD
click to play video
Scheduled recording with the built-in EPG
in WinTV v10
click to play video
WinTV v10 scheduling recordings with TitanTV
click to play video
Wipe out your channel database and
rescan for channels
click to play video
Having a problem with Windows Defender
Anti-virus when installing? Here's how to
temporarily turn off Defender
click to play video