WinTV v10 Application Download
Installation notes for WinTV v10:
If you do not have a WinTV v10 Activation Code, you can purchase a new WinTV v10 Activation Code on the Hauppauge webstore.
If you have purchased an Activation Code for WinTV v10 with Extend from the Hauppauge Webstore, the latest version of WinTV v10 with Extend will be installed.
Installation on multiple computers: the WinTV application can be installed on as many PCs as needed as long as you use the same Hauppauge device. We link the serial number of your TV tuner (sometimes it's the MAC address) with the Activation code. So as long as you use the same Hauppauge device, you can install on more than one computer.
WinTV v10
This download is a complete WinTV v10 application, including Windows drivers for supported WinTV products plus utilities.
For Windows 11 and 10 (with limited support for Windows 8 and 7)
Version: 42298 | File size: 161 MB | Date: 15.10.2024
Release notes | Backup download site | Previous version 41041
Beta version
Includes video decoders for new ATSC TV broadcasts using H.264 and HEVC encoding. Note: run 'Empty Channel Database' and rescan for channels to detect the new decoders.
wintv10setup_42305.exe
Please note: due to changes in Microsoft's code signing policy for Windows 7 and 8, new drivers cannot be signed for the 64-bit version of Windows 7 and 8. The WinTV v10 application will work, but the drivers will not install without warning messages. Windows 10 and 11 will install normally.
WinTV v10 installation instructions
The WinTV v10 will install Windows drivers before installing the WinTV v10 application.
- Step 1: Download the WinTV v10 installer by clicking the download button above. The WinTV v10 installer is normally saved in the Download folder on your PC
- Step 2: Run wintv10setup from the Download folder on your PC. If you see the message "Windows Protected Your PC, Windows Smartscreen prevented an unrecognized app ...", click 'More info' and 'Run anyway'. Windows Smartscreen is a new 'feature' in Windows 10 to prevent new updates from being installed automatically.
- Step 3: Halfway through the installation, a message will pop up asking for you to enter the Activation Code.
- Step 4: At the Activation required screen, click on Enter Activation code and enter the activation code which was emailed to you or is printed on the WinTV v10 activation card. You do not need to enter the dashes, and you can use upper or lower case characters.
- Step 5: When the installation is complete, you will find the WinTV icon on your Windows desktop. Double click on this icon and the WinTV application will run. On the first run of WinTV, it will automatically go through the TV source selection and will scan for channels.
Windows Drivers
WinTV-NOVA-S2 and 461e
Linux for the WinTV-dualHD
Please see our Linux page for Ubuntu and Plex instructions:please see here.
For the Hauppauge close source Linux driver, please send an e-mail message to: jfox@hauppauge.com