Support: WinTV-HVR-1110

WinTV Windows driver and WinTV v7 latest version download

WinTV v7 application and driver download package

WinTV v7 installation package, version 3.9g
For Windows 8, 7, Vista and XP

File name: wintv7_cd_3.9g.exe
File size: 151.4 MB
Date: 02/12/2015

This download is a complete installation package, including drivers for supported WinTV products plus the WinTV v7 application and utilities.

Installation notes:

A valid WinTV application CD-ROM will be needed to install this WinTV v7 version. Any WinTV v6 or WinTV 7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to WinTV v7, you can purchase a new CD on the Hauppauge webstore

If you have a WinTV v7.2 CD-ROM with Extend, then the latest version of WinTV Extend will also be installed.

To install the WinTV v7 application update

  • Download the WinTV v7 installation package to your PC. After downloading this file, the file is normally saved in the Download directory on your PC
  • Run wintv7_cd.exe from the Download directory on your PC
  • Click Step 1. Install Drivers. This will install the WinTV Windows driver. At the completion of the driver install, you should see a message which says Drivers have been updated sucessfully.
  • Click Step 2. Install WinTV. This will install the WinTV v7 application, 'middleware', TV services and other necessary files.

This will complete the driver and application installation for your WinTV.

Release notes for WinTV v7:

  • Adds support for HD PVR 2 models 1573xx
  • Fixes an issue installing IR on drives with 2TB+
  • Fixes an issue which could cause scheduled recordings not to start after a reboot if the database had got too large
  • Updated translations
  • Adds support for HVR-1955/HVR-1975

Windows driver

The WinTV-HVR-1110 Windows driver can be used with all versions of Windows Media Center and other third party TV applications

Download WinTV-HVR-11xxx driver version 30325

Name: 88x_2_126_30325_SIGNED.zip
Version: 2.126.30325
Size: 1.44 MB

To install the latest Windows driver only:

Leave your WinTV-HVR-1110 plugged into your PC. Follow the following steps:

  • Download the WinTV-HVR-1110 driver update.
  • Unzip this file to a directory you will remember, such as WINTV. It will create a new folder. To install, open the folder.
  • Run HCWDRIVERINSTALL.EXE.
  • This will install the WinTV-HVR base driver. At the completion of the driver install you should see a message which says Drivers have been updated successfully.

Add-ons for the WinTV-HVR-1110

WinTV Digital Signal Strength Indicator

Signal Strength Indicator version 32308

The WinTV Digital Signal Strength indicator displays information about the quality of the digital TV channel you are watching. This application is used with the WinTV v6 and WinTV v7 applications.

Click here for instructions on using this application.

Software Encoder for Mediacenter plugin

Mediacenter plugin

File Name: SoftMCE_Setup.exe
Size: 2.22 MB

WinTV-HVR-1110 Manuals and documentation

Windows Media Center: Setting up an analogue terrestrial signal.

Windows Media Center: Setting up a digital freeview signal.

Windows Media Center: Setting up a Sky satellite set top box (Note: Windows Media Center Remote Control and IR receiver/blaster needed).

downloadDownload Prodinfo

Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe

downloadDownload HCW Clear

HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the Wintv program.